Raw Water application
Vertical Turbine Pump
BHR / BHQ / BHM / BHK/ BHMa / BHA

Theses pumps are constructed rigidly to ensure vibration free operation. Hydraulic design is being updated with our continuous R&D efforts to meet requirements of higher efficiency and lower submergence, taking care of other parameters such as, high reliability and optimum system design.

Raw Water application

NS Non Clog Submersible Pump

SHL are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, water carrying gravel and so on. Specification:  Delivery size up to 200 mm Capacity up to 800 m³/hr Head up to 90 m Temperature (-) 10 °C to 140 °C Application: Sludge Sewage Power material slurries Sugar factory waste Features: Solid size up to 105 mm Back pull-out design Gland packed / Mechanical Seal 50 Hz / 60 Hz availability Also available in vertical execution

 Return Sludge application Submersible Sewage Pump / Waste Sludge application

NS : Non Clog Submersible Pump

These are single stage, single suction pumps with overhung non-clogging impeller. Pumps can be offered in stationary as well as transportable arrangements. The stationary arrangement is supplied with pump connector unit and the connector unit is connected to pump support bracket with rubber diaphragm to make it leak proof joint. Features:  Non-clog two vane or single vane enclosed impeller Permissible solid size up to 85 mm Gland packed / Mechanical seal 50 HZ / 60 HZ availability Application: Effluents Raw Sewage Storm Water Waste Water

Specification:  Delivery size from 40 mm to 200 mm Capacity up to 750 m/hr Head up to 48 m Temperature (-) 10°C to 90°C

Treated Sewage application
Submersible Sewage Pump
SHM Solid Handling Pumps

Treated Sewage application
Submersible Sewage Pump
SHL Solid Handling Pumps

SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, water carrying gravel and so on..

Treated Sewage application

Mixed Flow Pump / / Process Water Application
MF Utility Pump

These low head high capacity pumps can be either gland packed or mechanically sealed. Delivery options can be of either horizontal or vertical. These are majorly used in air conditioning, irrigation, drainage and storm water. Delivery size can vary from 200 mm to 650 mm. Features:  Low head, high capacity pumps Gland packed / Mechanical Seal 50HZ / 60 HZ availability Option available in horizontal as well as vertical delivery position Application: Drainage Storm water Irrigation Air-conditioning Specification:  Delivery size up to 650 mm Capacity up to 7000 m³ /hr Head up to 30 m Temperature (-) 5 °C to 140 °C

High Pressure application
RKB Horizontal Multistage pump

RKB is a multistage centrifugal side suction, vertical delivery, horizontal pump with diffuser type casing. Pump shaft is supported in anti-friction bearings. Enclosed impellers are of radial flow type provided with balancing holes. These pumps have standard lubrication of grease and are suitable for coupling with electric motors. Features:  Gland Packed / Mechanical Seal 50 Hz / 60 Hz availability Application: Fire-fighting Booster Service Mine Dewatering Boiler feed Specification:  Delivery size up to 250 mm Capacity up to 850 m3 /hr Heads up to 850 m Temperature (-) 40 °C to 140 °C